Made-to-measure bathroom cabinets in Xàbia

In a bathroom every centimetre counts, and off-the-shelf units almost never allow for the trap, the window or the extractor fan. Made-to-measure bathroom cabinets in Xàbia are drawn up around those obstacles so the storage works with damp, frequent cleaning and a clear walkway. This page explains what to check before ordering a bathroom cabinet: pipework, depth, materials, how it is supported and maintenance. With that information, your request reaches us ready to go.

Shape your next wardrobe.

Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.

Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.

What you need to store and where you'll use it

Plan · example Elevation · bathroom
mirror 30 cm 123
1Vanity unit under the basin 2Tall unit in a narrow gap 3Plinth raised off the floor

Before choosing a front or a colour, make a list of what needs to live in the bathroom: hand and bath towels, daily toiletries, medicines, spare loo roll, cleaning products, hairdryer. Each group calls for a different height. What you use every morning should sit between waist and shoulder height; heavy items go low down; anything a child shouldn't touch goes high up or behind a catch.

In a home in Xàbia, where in summer visitors come and go with beach towels, a space for large towels is often added. With that list, the made-to-measure bathroom cabinet stops being a generic piece of furniture and starts to fit your routine.

01

Basin, trap and pipe runs

The vanity unit under the basin is the most constrained piece. The water pipes, the waste and the trap sit right in the middle of the space. A common solution is to open the unit up in a U shape, with drawers that wrap around the trap, or to fit a single cut-out top drawer and a continuous shelf below.

Every gap in the wall, every angle valve and every stopcock is measured during the visit. On the wall, the best approach is to photograph the outlets and note their height from the floor. From that sketch comes a vanity unit that closes at the front but lets through whatever needs to pass, with no makeshift cuts.

Made-to-measure bathroom cabinet in light wood with open doors, shelves and wicker baskets in Xàbia
02

Access panels and ventilation that must stay clear

In many bathrooms there is an access hatch for the meter, a panel for a soil stack or a ventilation duct. A well-planned bathroom cabinet doesn't cover them up. The design reserves a removable panel or a door, and the ventilation keeps its outlet or grille.

You also need to leave air around the extractor fan and avoid pushing the unit up against a window that opens inwards. Moisture that can't escape stays in the unit and shows up on the edges and hinges, especially in the summer months, when the bathroom is used more and the air in Xàbia is already humid. If any of this isn't clear, send photos of the duct or the grille; it's better to find out at the start than to discover it during installation.

Have you already measured the space?

Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.

03

Depth and door opening in a small bathroom

  • 01

    When the bathroom is narrow, depth rules. A shallow bathroom cabinet, 15 to 25 cm deep, lets you walk past without brushing against it and still holds bottles, creams and rolled-up towels. Tall, slim columns make the most of the height without taking up floor space.

  • 02

    The way it opens decides how you use it every day. A hinged door needs room to swing and may clash with the shower screen or the bathroom door. A sliding door saves on swing space, though it only gives access to half the opening at a time. Drawers make better use of the depth, but need space in front. That's why we always draw the path of each door on the plan.

04

Materials, edging and areas exposed to water

The bathroom is the place in the home where materials work hardest. Moisture-resistant boards and damp-resistant finishes are the sensible foundation. What suffers most are the edges: if water gets in through an unsealed joint, the board swells from the inside.

It pays to edge the lower part of the unit carefully and seal the joints near the basin and the shower. Around the tap, a worktop or front that withstands splashes is preferable. Ask for the quote to state which material is used for the carcass, which for the front and which for the inside of the drawers.

Instagram

Latest work by SI, ARMARIO

@si.armario

Made-to-measure wardrobes and walk-in wardrobes

Latest posts

05

Floor-standing or wall-hung: what to check

A unit that stands on the floor is stable and can take more weight; a wall-hung one leaves the flooring visible, makes cleaning easier and gives a sense of space. Both work, but each raises a different question.

With a wall-hung unit you need to know what the wall is made of: brick, partition or plasterboard, because that determines how it is fixed. Pipes running behind it can also limit the fixing points. With a floor-standing unit, the bathroom floor is rarely flat, so this is compensated for with adjustable feet and a plinth. It's best to decide this once the measuring is done, not before. Also ask about the expected weight of what you'll store, especially if it's large glass jars or bottles of bulk product.

Wall-hung bathroom vanity unit and tall cabinet in light wood with flat doors and open shelves in Xàbia
Measuring visit

Ask us to come and measure up in Xàbia

  • 01You leave us your name and your area.
  • 02We message you on WhatsApp to agree a day.
  • 03The measuring visit costs €50 and is free if you place an order.
06

Cleaning and caring for your cabinet

A bathroom cabinet is cleaned almost daily, and that affects the design. Smooth fronts, without deep mouldings, dry with a cloth. Integrated handles avoid corners where limescale builds up, a typical problem on the Alicante coast when the water is hard.

It also helps to keep the inside clear of the floor: drawers with a raised base and shelves with rounded edges are quick to empty and wipe clean. Ventilate after showering and dry the vanity unit if there are spills. That habit protects the finish better than any extra treatment. If a lot of salt or sand comes into your bathroom in Xàbia with swimming costumes, a mat nearby and a basket for wet clothes stop it reaching the back of the unit.

07

What the carpentry includes and what is priced separately

  • 01

    The carpentry side covers the design of the unit, its manufacture and its installation on the wall or floor. Plumbing, electrics and tiling are jobs for other trades and are priced separately: if a waste pipe needs moving or a socket installed next to the mirror, an installation professional coordinates that.

  • 02

    If you'd like to know how a project is organised, see how we work. To plan your bathroom cabinet, request a quote with photos and measurements. Manufacturing takes on average between 2 and 3 weeks, and the measuring visit costs €50 if you don't order the unit and is free if you do.

Enquiry

Tell us about your project in Xàbia

  1. 1We read your message and look at your photos.
  2. 2We reply on WhatsApp with a first figure.
  3. 3We measure up and prepare the final quote. The measuring visit costs €50 if you don't go ahead with the order and is free if you do.

We don't cut a single board until you've approved the design and the price.

Your fitted wardrobe

2 MIN

We'll prepare a WhatsApp message for you. You can review it before sending and attach your photos directly in the chat.

Questions

Frequently asked questions about wardrobes in Xàbia

After installation: warranty and care for your wardrobe.

What do I do with the gaps around the trap?

They get put to use. With a U-shaped vanity unit with a cut-out drawer, the sides stay useful for bottles and baskets. The exact space depends on where the waste comes out and what type of trap you have, so it's best to measure with the new unit in mind.

Will a made-to-measure bathroom cabinet fit in a small bathroom?

Usually yes, because it is designed around the depth available; in Xàbia many apartment bathrooms are compact, and that's exactly where made-to-measure pays off. A 20 cm column, a wall-hung unit that leaves the floor visible or a bathroom cabinet above the toilet usually solve the storage where an off-the-shelf unit won't fit.

What needs to stay accessible for maintenance?

The stopcocks, the meter access hatch, the extractor outlet and any access panel for the installation. The unit is designed with removable panels or service doors in those areas.

Who moves a pipe or fits a light point next to the unit?

The carpentry covers the unit, not those installations. If a pipe needs moving, a tap changing or a light point fitting, the relevant professional does it, and it's best done before the unit is fixed in place.

Which material copes best with humidity?

Moisture-resistant boards with sealed edges and water-resistant finishes are the most sensible foundation. The result depends as much on the material as on ventilation and wiping away splashes. The proposal states which material each piece is made from.

Shall we talk about your project?

Send us a photo of the space and some approximate measurements on WhatsApp: we'll give you some initial guidance and arrange the measuring visit.

Your satisfaction is our priority We listen to your ideas and go through the measurements, finishes and every detail of the project with you.
WhatsAppQuote