Care and adjustments for your made-to-measure wardrobe in Xàbia
A well-cared-for made-to-measure wardrobe stays looking as good as the day it was fitted for many years. On this page we've gathered cleaning and maintenance tips designed for homes in Xàbia, explained how to let us know if you need an adjustment, and pointed you to where you'll find the terms of your project, which are set out in writing in every quote.
Shape your next wardrobe.
Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.
Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.
What paperwork to keep
Keep the signed final quote, the approved design and any messages in which changes were agreed. These set out the materials, fittings and terms of your project. If you ever have a question about what was agreed, those documents are your reference.
It's also worth taking photos of the finished wardrobe on the day of installation. They're handy if you later want to compare the condition of a door or a drawer.

Cleaning according to the finish
For melamine and lacquered surfaces, a soft, slightly damp cloth is all you need and, if necessary, a very dilute neutral soap. Avoid scouring pads, solvents and products containing bleach or ammonia, as they dull the shine and can damage the edges.
For wood or veneer finishes, use an almost dry cloth and wipe in the direction of the grain. Mirrors and glass should be cleaned with a specific cleaner applied to the cloth rather than directly onto the panel, so the liquid doesn't seep in around the edges.
Have you already measured the space?
Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.
Humidity and the coastal climate
- 01
In homes near the sea, humidity in the air and salt affect fittings and boards over time. Ventilate the room daily, don't put damp bags or freshly washed clothes inside, and in homes that are shut up for weeks at a time, leave the doors slightly ajar or use moisture absorbers.
- 02
If you notice mould or marks, wipe them away as soon as possible with a cloth and vinegar diluted in water, and ventilate well before putting clothes back.
Hardware, runners and hinges
The runners of sliding doors collect dust and fluff. Run a vacuum cleaner with a narrow nozzle along them every few weeks, then go over them with a dry cloth. Don't apply oil or grease: they mix with the dust and form a paste that makes the doors stick.
Hinges and soft-close mechanisms may need readjusting with use. If a door rubs, sits out of line or closes unevenly, don't force it: let us know and we'll assess the adjustment.
Latest work by SI, ARMARIO
@si.armario
Made-to-measure wardrobes and walk-in wardrobes
Latest posts
What to send when you ask for help
To identify any adjustment quickly, write to us with the project address or the name the order is under, a short description of the problem and two or three photos: one of the whole piece and one close-up. If it's a problem with movement, a short video helps more than a photo.
There's no need to send personal details over open channels; the project reference is enough.

Ask us to come and measure up in Xàbia
- 01You leave us your name and your area.
- 02We message you on WhatsApp to agree a day.
- 03The measuring visit costs €50 and is free if you place an order.
Where to find the terms of your project
The terms that apply to each order are set out in the written quote you receive before approving it. This page doesn't set deadlines or cover; what applies to your furniture is what appears in that document. If you need to clarify anything, ask before approving, via contact or WhatsApp.
To go over the steps of an order, see how we work.
Questions
Frequently asked questions about wardrobes in Xàbia
Who do I send an issue to?
Use the same channel you used to manage the project: WhatsApp, or the project e-mail quoting your reference. The more information you include in your first message, the faster we can identify the adjustment.
What photos help to identify an adjustment?
One of the whole door or piece and one of the exact spot where the problem occurs. If the fault appears when something moves, a video of a few seconds says more than several photos.
How do I know which cleaning product to use?
It depends on the finish. For almost all of them, water with neutral soap and a soft cloth are enough. If in doubt, ask us about your material before trying a new product.
Shall we talk about your project?
Send us a photo of the space and some approximate measurements on WhatsApp: we'll give you some initial guidance and arrange the measuring visit.

